PEDALS

Sort this list by
  • Look

  • We are proud to present you the new range of GEO TREKKING pedals, our new standard when it comes to hybrid pedals, featuring one flat and one automatic side.

    Right now, mobility is the word on everyone’s lips.

    The emergence of E-BIKES is bringing about new forms of simpler, more environmentally-friendly mobility, sustainably transforming our city centers, our roads and our way of getting around. Bolstered by 35 years of experience in the design of pedals, LOOK has always striven to respond to these new expectations with a well-considered, designed and tested range of products aiming to help and accompany users in their attempts to sustainably change the way they get around.

    ONE CLIPLESS SIDE…

    The GEO TREKKING pedal range has been designed to support you in your everyday journeys, between office and home, in the city, on cycle lane, amongst traffic or simply when adventure calls and you set off on roads or trails, in search of new horizons. Featuring a flat side and a clipless side, their versatility means that they can tackle every situation and all conditions, providing unparalleled freedom of spirit.

    The CLIPLESS side is based on a mechanism compliant with the micro cleat standard, compatible with SPD cleat. This mechanism features across the entire range and enables simple and secure clip-in and clip-out. The retention adjustment system enables an adjustment from 5 to 10. All the pedals are supplied with the EASY cleat with 30% easier clip-in and more natural multidirectional clip-out, offering the possibility of a movement combining rotation and traction.

    … ONE FLAT SIDE

    The GEO TREKKING model features a body made from injected composite and lightweight molded spikes thus being suitable for a broad scope of practice. This model is also available in the VISION light version.

    Technology:HYBRID PEDALS = HALF FLAT + HALF CLIPLESS
    Cleat:EASY
    Cleat Standard:SPD COMPATIBLE
    Release Angle:13°
    Retention:5 - 10
    Body:COMPOSITE
    Traction:COMPOSITE STUDS
    Spindle:CHROMOLY +
    Platform Width:84mm
    Q Factor:56mm
    Weight Pedal:203g
    Weight Pair + Cleat:461g

    MANUFACTURER: Look

    £59.00

  • We are proud to present you the new range of GEO TREKKING pedals, our new standard when it comes to hybrid pedals, featuring one flat and one automatic side.

    Right now, mobility is the word on everyone’s lips.

    The emergence of E-BIKES is bringing about new forms of simpler, more environmentally-friendly mobility, sustainably transforming our city centers, our roads and our way of getting around. Bolstered by 35 years of experience in the design of pedals, LOOK has always striven to respond to these new expectations with a well-considered, designed and tested range of products aiming to help and accompany users in their attempts to sustainably change the way they get around.

    ONE CLIPLESS SIDE…

    The GEO TREKKING pedal range has been designed to support you in your everyday journeys, between office and home, in the city, on cycle lane, amongst traffic or simply when adventure calls and you set off on roads or trails, in search of new horizons. Featuring a flat side and a clipless side, their versatility means that they can tackle every situation and all conditions, providing unparalleled freedom of spirit.

    The CLIPLESS side is based on a mechanism compliant with the micro cleat standard, compatible with SPD cleat. This mechanism features across the entire range and enables simple and secure clip-in and clip-out. The retention adjustment system enables an adjustment from 5 to 10. All the pedals are supplied with the EASY cleat with 30% easier clip-in and more natural multidirectional clip-out, offering the possibility of a movement combining rotation and traction.

    … ONE FLAT SIDE

    The GEO TREKKING model features a body made from injected composite and lightweight molded spikes thus being suitable for a broad scope of practice. This model is also available in the VISION light version.

    VISION : THE INNOVATIVE LIGHT SOLUTION

    Having experienced it ourselves time and again, we are aware of the apprehension that cyclists can feel when cycling in heavy traffic. Will drivers see me clearly?

    Interaction between drivers and cyclists is a key factor when it comes to safety on two wheels. This idea was at the heart of our concerns during the development of the new GEO TREKKING range.

    And so we came up with the VISION solution. A light, simple, easy to use and versatile, which clips onto your pedal.

    With a power rating of 15 lumens, the VISION light makes you visible from more than 400 meters with an angle of 180°, making you visible from the side as well and keep you safe at crossroads.

     

    Technology:HYBRID PEDALS = HALF FLAT + HALF CLIPLESS
    Cleat:EASY
    Cleat Standard:SPD COMPATIBLE
    Release Angle:13°
    Retention:5 - 10
    Body:COMPOSITE
    Traction:COMPOSITE STUDS
    Spindle:CHROMOLY +
    Platform Width:84mm
    Q Factor:56mm
    Weight (Pedal):217g
    Weight Pair + Cleats:490g
    Light Included:YES (x 2)
    Light Mode:3 (STEADY / FLASH / FLASH ECO
    Battery Life:UP TO 30 h (FLASH ECO)
    Light Output:15 LUMENS
    Battery:MICRO USB RECHARGEABLE (CABLE PROVIDED)
    Charging Time:50 MIN
    Beam Angle:180°
    Unit Light Weight:14g

    MANUFACTURER: Look

    £95.00

  • We are proud to present you the new range of GEO TREKKING pedals, our new standard when it comes to hybrid pedals, featuring one flat and one automatic side.

    Right now, mobility is the word on everyone’s lips.

    The emergence of E-BIKES is bringing about new forms of simpler, more environmentally-friendly mobility, sustainably transforming our city centers, our roads and our way of getting around. Bolstered by 35 years of experience in the design of pedals, LOOK has always striven to respond to these new expectations with a well-considered, designed and tested range of products aiming to help and accompany users in their attempts to sustainably change the way they get around.

    ONE CLIPLESS SIDE…

    The GEO TREKKING pedal range has been designed to support you in your everyday journeys, between office and home, in the city, on cycle lane, amongst traffic or simply when adventure calls and you set off on roads or trails, in search of new horizons. Featuring a flat side and a clipless side, their versatility means that they can tackle every situation and all conditions, providing unparalleled freedom of spirit.

    The CLIPLESS side is based on a mechanism compliant with the micro cleat standard, compatible with SPD cleat. This mechanism features across the entire range and enables simple and secure clip-in and clip-out. The retention adjustment system enables an adjustment from 5 to 10. All the pedals are supplied with the EASY cleat with 30% easier clip-in and more natural multidirectional clip-out, offering the possibility of a movement combining rotation and traction.

    … ONE FLAT SIDE

    The GEO TREKKING GRIP model has a completely flat side with a soft elastomer grip, to increase traction without damaging the soles of your shoes.

    Technology:HYBRID PEDALS = HALF FLAT + HALF CLIPLESS
    Cleat:EASY
    Cleat Standard:SPD COMPATIBLE
    Release Angle:13°
    Retention:5 - 10
    Body:COMPOSITE / ELASTOMER BI INJECTION
    Traction:ELASTOMER BI INJECTION
    Spindle:CHROMOLY +
    Platform Width:86mm
    Q Factor:56mm
    Weight (Pedal):228g
    Weight Pair + Cleats:511g

    MANUFACTURER: Look

    £68.00

  • We are proud to present you the new range of GEO TREKKING pedals, our new standard when it comes to hybrid pedals, featuring one flat and one automatic side.

    Right now, mobility is the word on everyone’s lips.

    The emergence of E-BIKES is bringing about new forms of simpler, more environmentally-friendly mobility, sustainably transforming our city centers, our roads and our way of getting around. Bolstered by 35 years of experience in the design of pedals, LOOK has always striven to respond to these new expectations with a well-considered, designed and tested range of products aiming to help and accompany users in their attempts to sustainably change the way they get around.

    ONE CLIPLESS SIDE…

    The GEO TREKKING pedal range has been designed to support you in your everyday journeys, between office and home, in the city, on cycle lane, amongst traffic or simply when adventure calls and you set off on roads or trails, in search of new horizons. Featuring a flat side and a clipless side, their versatility means that they can tackle every situation and all conditions, providing unparalleled freedom of spirit.

    The CLIPLESS side is based on a mechanism compliant with the micro cleat standard, compatible with SPD cleat. This mechanism features across the entire range and enables simple and secure clip-in and clip-out. The retention adjustment system enables an adjustment from 5 to 10. All the pedals are supplied with the EASY cleat with 30% easier clip-in and more natural multidirectional clip-out, offering the possibility of a movement combining rotation and traction.

    … ONE FLAT SIDE

    The GEO TREKKING ROC model has an aluminum body to withstand impacts and scratches. It is intended primarily for an «off-road» use, thanks to its 8 traction pins on the flat side, enabling extreme adhesion.

    Technology:HYBRID PEDALS = HALF FLAT + HALF CLIPLESS
    Cleat:EASY
    Cleat Standard:SPD COMPATIBLE
    Release Angle:13°
    Retention:5 - 10
    Body:ALUMINIUM
    Traction:8 TRACTIONS PINS
    Spindle:CHROMOLY +
    Platform Width:83mm
    Q Factor:56mm
    Weight (Pedal):233g
    Weight Pair + Cleats:521g

    MANUFACTURER: Look

    £95.00

  • We are proud to present you the new range of GEO TREKKING pedals, our new standard when it comes to hybrid pedals, featuring one flat and one automatic side.

    Right now, mobility is the word on everyone’s lips.

    The emergence of E-BIKES is bringing about new forms of simpler, more environmentally-friendly mobility, sustainably transforming our city centers, our roads and our way of getting around. Bolstered by 35 years of experience in the design of pedals, LOOK has always striven to respond to these new expectations with a well-considered, designed and tested range of products aiming to help and accompany users in their attempts to sustainably change the way they get around.

    ONE CLIPLESS SIDE…

    The GEO TREKKING pedal range has been designed to support you in your everyday journeys, between office and home, in the city, on cycle lane, amongst traffic or simply when adventure calls and you set off on roads or trails, in search of new horizons. Featuring a flat side and a clipless side, their versatility means that they can tackle every situation and all conditions, providing unparalleled freedom of spirit.

    The CLIPLESS side is based on a mechanism compliant with the micro cleat standard, compatible with SPD cleat. This mechanism features across the entire range and enables simple and secure clip-in and clip-out. The retention adjustment system enables an adjustment from 5 to 10. All the pedals are supplied with the EASY cleat with 30% easier clip-in and more natural multidirectional clip-out, offering the possibility of a movement combining rotation and traction.

    … ONE FLAT SIDE

    The GEO TREKKING ROC model has an aluminum body to withstand impacts and scratches. It is intended primarily for an «off-road» use, thanks to its 8 traction pins on the flat side, enabling extreme adhesion.

    VISION : THE INNOVATIVE LIGHT SOLUTION

    Having experienced it ourselves time and again, we are aware of the apprehension that cyclists can feel when cycling in heavy traffic. Will drivers see me clearly?

    Interaction between drivers and cyclists is a key factor when it comes to safety on two wheels. This idea was at the heart of our concerns during the development of the new GEO TREKKING range.

    And so we came up with the VISION solution. A light, simple, easy to use and versatile, which clips onto your pedal.

    With a power rating of 15 lumens, the VISION light makes you visible from more than 400 meters with an angle of 180°, making you visible from the side as well and keep you safe at crossroads.

    Technology:HYBRID PEDALS = HALF FLAT + HALF CLIPLESS
    Cleat:EASY
    Cleat Standard:SPD COMPATIBLE
    Release Angle:13°
    Retention:5 - 10
    Body:ALUMINIUM
    Traction:8 TRACTIONS PINS
    Spindle:CHROMOLY +
    Platform Width:83mm
    Q Factor:56mm
    Weight (Pedal):247g
    Weight Pair + Cleats:550g
    Light Included:YES (x 2)
    Light Mode:3 (STEADY / FLASH / FLASH ECO)
    Battery Life:UP TO 30 H (FLASH ECO)
    Light Output:15 LUMENS
    Battery:MICRO USB RECHARGEABLE (CABLE PROVIDED)
    Charging Time:50 MIN
    Beam Angle:180°
    Unit Light Weight:14g

    MANUFACTURER: Look

    £130.00

  • RIDE AT YOUR BEST

    THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS.

    The LOOK design team has completely remodelled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.

    TECHNOLOGIES

    OPTIMIZED CONTACT SURFACE

    The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product.

    The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal.

    We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance.

    Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best.

    IMPROVED SPINDLE PROFILE

    The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.

    A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play.

    The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.

    SPECIFICATIONS
    USAGE: Recreational to Competition
    BODY: Composite
    AXLE: Chromoly +
    PEDAL STACK HEIGHT + CLEATS: 17,3 mm
    CONTACT SURFACE AREA: 500 mm²
    FLOAT: 8 or 12 adjustable spring
    CLEATS: Kéo Grip Cleats
    PEDAL WEIGHT: 130 gr (328 gr per pair with cleats and screws)
    COLOURS: Black or White
    ACCESSORIES: A pair of Grey Kéo Grip cleats + screws
    GUARANTY: 2 years

    COLOUR: black
    MANUFACTURER: Look

    £79.00

  • RIDE AT YOUR BEST

    THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS.

    The LOOK design team has completely remodelled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.

    TECHNOLOGIES

    OPTIMIZED CONTACT SURFACE

    The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product.

    The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal.

    We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance.

    Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best.

    IMPROVED SPINDLE PROFILE

    The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.

    A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play.

    The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.

    SPECIFICATIONS
    USAGE: Recreational to Competition
    BODY: Composite
    AXLE: Chromoly +
    PEDAL STACK HEIGHT + CLEATS: 17,3 mm
    CONTACT SURFACE AREA: 500 mm²
    FLOAT: 8 or 12 adjustable spring
    CLEATS: Kéo Grip Cleats
    PEDAL WEIGHT: 130 gr (328 gr per pair with cleats and screws)
    COLOURS: Black or White
    ACCESSORIES: A pair of Grey Kéo Grip cleats + screws
    GUARANTY: 2 years

    COLOUR: white
    MANUFACTURER: Look

    £79.00

  • RIDE AT YOUR BEST

    THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS.

    The LOOK design team has completely remodelled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.

    TECHNOLOGIES

    OPTIMIZED CONTACT SURFACE

    The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product.

    The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal.

    We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance.

    Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best.

    IMPROVED SPINDLE PROFILE

    The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.

    A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play.

    The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.

    SPECIFICATIONS
    USAGE: Recreational to Competition
    BODY: Carbon
    AXLE: Chromoly +
    PEDAL STACK HEIGHT + CLEATS: 17,3 mm
    CONTACT SURFACE AREA: 500 mm²
    FLOAT: 8 or 12 adjustable spring
    CLEATS: Kéo Grip Cleats
    PEDAL WEIGHT: 125 gr (312 gr per pair with cleats and screws)
    COLOURS: Black
    ACCESSORIES: A pair of Grey Kéo Grip cleats + screws
    GUARANTY: 2 years

    COLOUR: black
    MANUFACTURER: Look

    £95.00

  • ONE-OF-A-KIND EXPERIENCE, BLADE TECHNOLOGY

    The Blade body and blade are built from composite material. This substance makes the production of a range of less rigid blades possible – 08 to 12 -, for a cleat engagement and release feel that falls between a metal spring and a carbon blade pedal.

    The Blade brings together all the benefits of a blade pedal: crisper in and out clipping, better foot support for more security, aerodynamic shape and low weight (compared to a conventional spring system). The platform contact area has been enlarged, providing excellent pedalling stability.

    TECHNOLOGIES

    BLADE TECHNOLOGY

    Blade technology uses a blade instead of a conventional metal spring, which has many advantages for the user:
    • Safe cleat entry/ release: the blade flexes, providing a firm hold once clipped-in, and when clipping-out, releases the foot faster at the end of the process in a quick and secure movement.
    • An aerodynamic shape: thanks to the integration of the blade inside the body, pedals equipped with BLADE technology have the best aerodynamic shape ever created.
    • Low weight: the design of the pedal around a blade system allows a significant reduction in weight and better load distribution.

    SPINDLE: MORE STABILITY AND BETTER LOAD DISTRIBUTION
    The Blade Carbon pedal spindle was designed to obtain a very low stack height: only 13mm. It uses a needle bearing cartridge installed in a central position for better stress resistance while pedalling and two spaced out ball bearings which distribute the load, providing increased rigidity between the body and the length of the spindle guaranteeing excellent rotational speed.

    Axle play (related to internal bearing movement and part wear) is eliminated by a wave spring that constantly applies a pre-load that does not deteriorate over time. When pushing hard on the pedals, this system can completely eliminate the annoyances caused by any play (noise and sensation of friction).

    LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

    CONTACT SURFACE AREA: MAXIMUM POWER TRANSFER
    To answer the desires of some of the most demanding cyclists, notably competitors, the pedal and cleat system must allow efficient power transfer through a broad and rigid contact surface.

    Because of this, the Blade Carbon platform surface is covered with a 64mm wide, stainless steel plate that has been moulded into the body and optimizes, regardless of pedalling style, the over 400 mm² cleat/pedal contact area.

    SPECIFICATIONS
    USAGE: Regular rider to Competitive
    BODY: Composite
    AXLE: Chromoly steel +
    THREADING: 9/16 X 20 mm
    BEARINGS: 2 ball bearings, 1 needle bearing cartridge
    PEDAL STACK HEIGHT: 14 mm
    DISTANCE PEDAL SPINDLE / CRANK ARM: 53 mm
    CONTACT SURFACE AREA: 400 mm²
    FLOAT: 2 types of composite blades: 8 and 12
    CLEATS: Kéo Grip Cleats Grey
    ANGULAR MOVEMENT: 0 °, 4.5 ° or 9 ° according to the cleat colour (Black, Grey, Red)
    PEDAL WEIGHT: 120 gr (308 gr per pair with cleats and screws)
    COLOURS: Black or White
    ACCESSORIES: A pair of Grey Kéo Grip cleats + screws
    GUARANTY: 2 years

    COLOUR: white
    MANUFACTURER: Look

    £110.00

  • Designed to win, the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to the daily input from the greatest of champions. Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours.

    Technology:BLADE CARBON
    Tention:12 or 16 or 20
    Body:CARBON
    Spindle:CHROMOLY +
    Platform Material:STAINLESS STEEL / INOX
    Platform Area:700mm²
    Platform Width:67mm
    Stack Height + Cleats:14,8mm
    Weight Pedal:110g
    Weight Pair + Cleat:288g

    MANUFACTURER: Look

    £125.00

  • CERAMIC FASTER – LONGER
    Every component, every ball is meticulously selected to ensure the highest level of quality and performance. The balls are precisely calibrated one by one by a machine, down to the micrometre. They are then ordered according to size in perfectly adapted rings, with the result that every bearing has a totally unique structure.

    LONGER LIFE
    A long lifespan is the main advantage of ceramic bearings. Rounder and harder than traditional balls, they are less sensitive to dust or deposits and guarantee consistent, durable performance. Furthermore, ceramic is not subject to corrosion. These physical properties ensure the bearings have a lifespan 4 to 6 times longer than standard steel bearings.

    SMOOTHER
    Reduced friction is the best-known and most characteristic advantage of ceramic bearings. The perfectly circular shape and the hardness of the balls combined with ceramic-specific, optimized greases allows for an 18% reduction of the frictional forces applied to the bearing.

    SPINDLE
    In order to meet the requirements of the most demanding cyclists, the BLADE CARBON pedals are designed to resist the very worst weather conditions. Particular care is given to each component within the axle to ensure optimal lifespan. The axle is guaranteed waterproof by IPX7 (full immersion) and IPX6 (rotating pedal exposed to water jets) tests. The design of the outer cap and the inside nut have been revised to meet these requirements.

    BLADE TECHNOLOGY LIGHTER – AERODYNAMIC – SAFER
    The use of a carbon blade instead of a conventional metal spring offers numerous advantages: The “blade – lever” system is 20% lighter than a standard “spring – lever” system. The carbon blade blends fluidly into the shape and volume of the pedal, improving the overall aerodynamic properties of the product. The BLADE technology revolutionizes the engagement/ disengagement experience whilst offering firm and secure support. The bowing of the blade when unclipping means the required disengagement torque is reached more rapidly in the dynamic of the movement, allowing for faster cleat release. Pedalling experience is also improved thanks to a firmer lateral stop. The carbon blade is available in various stiffness options: 12, 16 or 20. The blade can be easily, intuitively and quickly (a few seconds suffice) changed depending on the rider’ s clip-in / clip-out preferences.

    THE BEST POWER TO WEIGHT RATIO
    The full extent of the power a cyclist develops is transferred to the bike – and the road – through the pedals. Without going into extensive scientific detail, the larger the contact area, the more efficient the transfer of energy will be. On the other hand, the wider contact area, the more the weight of the pedal increases. LOOK engineers have worked tirelessly to pinpoint the areas where energy transfer is optimal, in order to finetune design and reduce any unnecessary surfaces. This careful analysis was key to producing a pedal with the best weight-to-contact area ratio on the market today.

    Romain BARDET I AG2R LA MONDIALE
    "The rigor and thoroughness with which I approach each day is equalled only by my passion for cycling. In my eyes, nothing should ever be left to chance and my choice of equipment reflects this obsession. I have been riding LOOK pedals for 19 years and in them, I have found an ideal partner; a subtle blend of technology and craftsmanship to accompany and support me in my wildest dreams - one more reason of to keep pushing beyond the limits."

    SPECIFICATIONS
    USE:Race
    BODY:Carbon
    SPINDLE:Chromoly Steel +
    THREADING:9/16 X 20 mm
    BEARINGS:Ceramic
    STACK HEIGHT:14.8 mm
    DISTANCE PEDAL SPINDLE / CRANKARM:53 mm
    PLATFORM WIDTH:67 mm
    PLATFORM SURFACE AREA:700 mm²
    TENSION:Pedals come installed with “12” carbon blades + additional “16” carbon blades
    (“20” carbon blades sold separately)
    CLEATS:Kéo Cleats-Grey
    FLOAT:0 °, 4.5 ° or 9 ° according to the cleat colour (Black, Grey, Red)
    PEDAL WEIGHT:110 gr (288 gr per pair with cleats and screws)
    COLOURS:Black
    ACCESSORIES:2 sets of blades +1 pair of Kéo Cleats-Grey + screws
    WARRANTY:2 years

    COLOUR: black
    MANUFACTURER: Look

    £180.00

  • BLADE CARBON PEDAL
    Our elite-level, top-of-the-range weapon designed for pure racing performance. The unique, patented BLADE technology is combined with the unequaled properties of ceramic bearings and LOOK’s signature power-to-weight ratio, ensuring the pedal comes straight in as a reference on the market.

    CERAMIC
    FASTER - LONGER
    Every component, every ball is meticulously selected to ensure the highest level of quality and performance. The balls are precisely calibrated one by one by a machine, down to the micrometer. They are then ordered according to size in perfectly-adapted rings, with the result that every bearing has a totally unique structure.

    LONGER LIFE
    A long lifespan is the main advantage of ceramic bearings. Rounder and harder than traditional balls, they are less sensitive to dust or deposits and guarantee consistent, durable performance. Furthermore, ceramic is not subject to corrosion. These physical properties ensure the bearings have a lifespan 4 to 6 times longer than standard steel bearings.

    SMOOTHER
    Reduced friction is the best-known and most characteristic advantage of ceramic bearings. The perfectly circular shape and the hardness of the balls combined with ceramic-specific, optimized greases allows for an 18% reduction of the frictional forces applied to the bearing.

    SPINDLE
    In order to meet the requirements of the most demanding cyclists, the BLADE CARBON pedals are designed to resist the very worst weather conditions. Particular care is given to each component within the axle to ensure optimal lifespan. The axle is guaranteed waterproof by IPX7 (full immersion) and IPX6 (rotating pedal exposed to water jets) tests. The design of the outer cap and the inside nut have been revised to meet these requirements

    BLADE TECHNOLOGY
    LIGHTER – AERODYNAMIC - SAFER

    The use of a carbon blade instead of a conventional metal spring offers numerous advantages:

    The “blade – lever” system is 20% lighter than a standard “spring – lever” system.

    The carbon blade blends fluidly into the shape and volume of the pedal, improving the overall aerodynamic properties of the product.

    The BLADE technology revolutionizes the engagement/ disengagement experience whilst offering firm and secure support. The bowing of the blade when unclipping means the required disengagement torque is reached more rapidly in the dynamic of the movement, allowing for faster cleat release. Pedaling experience is also improved thanks to a firmer lateral stop.

    The carbon blade is available in various stiffness options: 12, 16 or 20. The blade can be easily, intuitively and quickly (a few seconds suffice) changed depending on the rider’s clip-in / clip-out preferences.

    Technology:BLADE
    Retention:SERIAL INSTALLED IN 16 + ADDITIONAL 12 IN BOX 20 SOLD SEPARATELY
    Body:CARBON
    Traction:CARBON
    Spindle:TITANIUM
    Bearings:CERAMIC
    Platform Area:700 mm²
    Platform Width:67mm
    Q Factor:53mm
    Stack Height + Cleats:14,8 mm ( 8,5 + 6,3 mm )
    Weight (Pedal):95g
    Weight Pair + Cleats:260g

    MANUFACTURER: Look

    £290.00

  • KÉO CLASSIC 3

    COMFORT AND STABILITY

    Discover the fun and the benefits of riding with the Kéo Classic 3 clipless pedal.

    Simple to use, it is impossible to adjustment the cleat entry/release tension too low for an easy clip out. Its large and wide contact surface provides excellent pedalling stability.

    TECHNOLOGIES

    CHROMOLY SPINDLE FOR MORE RELIABILITY

    The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.

    A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation).

    LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

    SPECIFICATIONS

    USAGE: Beginner to advanced
    BODY: Composite
    AXLE: Chromoly
    THREADING: 9/16 X 20 mm
    BEARINGS: 1 ball bearing, 1 needle bearing cartridge
    PEDAL STACK HEIGHT: 15,7 mm
    DISTANCE PEDAL SPINDLE / CRANK ARM: 53 mm
    CONTACT SURFACE AREA: 400 mm²
    FLOAT: 8 to 12 adjustable spring
    CLEATS: Kéo Grip Cleats
    ANGULAR MOVEMENT: 0 °, 4.5 ° or 9 ° according to the cleat colour (Black, Grey, Red)
    PEDAL WEIGHT:140 gr (348 gr per pair with cleats and screws)
    COLOURS: Black
    ACCESSORIES: A pair of Grey Kéo Grip cleats + screws
    GUARANTY: 2 years

    COLOUR: black
    MANUFACTURER: Look

    £45.00

  • KÉO CLASSIC 3

    COMFORT AND STABILITY

    Discover the fun and the benefits of riding with the Kéo Classic 3 clipless pedal.

    Simple to use, it is impossible to adjustment the cleat entry/release tension too low for an easy clip out. Its large and wide contact surface provides excellent pedalling stability.

    TECHNOLOGIES

    CHROMOLY SPINDLE FOR MORE RELIABILITY

    The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.

    A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation).

    LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

    SPECIFICATIONS

    USAGE: Beginner to advanced
    BODY: Composite
    AXLE: Chromoly
    THREADING: 9/16 X 20 mm
    BEARINGS: 1 ball bearing, 1 needle bearing cartridge
    PEDAL STACK HEIGHT: 15,7 mm
    DISTANCE PEDAL SPINDLE / CRANK ARM: 53 mm
    CONTACT SURFACE AREA: 400 mm²
    FLOAT: 8 to 12 adjustable spring
    CLEATS: Kéo Grip Cleats
    ANGULAR MOVEMENT: 0 °, 4.5 ° or 9 ° according to the cleat colour (Black, Grey, Red)
    PEDAL WEIGHT:140 gr (348 gr per pair with cleats and screws)
    COLOURS: Black
    ACCESSORIES: A pair of Grey Kéo Grip cleats + screws
    GUARANTY: 2 years

    COLOUR: black/white
    MANUFACTURER: Look

    £45.00

  • KÉO CLASSIC 3

    COMFORT AND STABILITY

    Discover the fun and the benefits of riding with the Kéo Classic 3 clipless pedal.

    Simple to use, it is impossible to adjustment the cleat entry/release tension too low for an easy clip out. Its large and wide contact surface provides excellent pedalling stability.

    TECHNOLOGIES

    CHROMOLY SPINDLE FOR MORE RELIABILITY

    The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.

    A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation).

    LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

    SPECIFICATIONS

    USAGE: Beginner to advanced
    BODY: Composite
    AXLE: Chromoly
    THREADING: 9/16 X 20 mm
    BEARINGS: 1 ball bearing, 1 needle bearing cartridge
    PEDAL STACK HEIGHT: 15,7 mm
    DISTANCE PEDAL SPINDLE / CRANK ARM: 53 mm
    CONTACT SURFACE AREA: 400 mm²
    FLOAT: 8 to 12 adjustable spring
    CLEATS: Kéo Grip Cleats
    ANGULAR MOVEMENT: 0 °, 4.5 ° or 9 ° according to the cleat colour (Black, Grey, Red)
    PEDAL WEIGHT:140 gr (348 gr per pair with cleats and screws)
    COLOURS: Black
    ACCESSORIES: A pair of Grey Kéo Grip cleats + screws
    GUARANTY: 2 years

    COLOUR: black/red
    MANUFACTURER: Look

    £45.00

  • Tool for removing axles on pre- 2013 LOOK pedal designs including original Keo and Quartz pedals. 

    Please note:

    • all - Keo 2 Max, Blade 1 and Classic 2 and S-Track only require a 19mm ring spanner
    • all - Blade 2 and 2Max Blades only require an Allen key

    MANUFACTURER: Look

    £15.00

  • LOOK KEO Carbon Cro-Mo Axle Assembley (1x pair)

    MANUFACTURER: Look

    £24.99

  • LOOK Axle Assembly Quartz Ti R/H

    MANUFACTURER: Look

    £76.99

  • LOOK Axle Assembly KEO Blade Carbon Ti R/H

    MANUFACTURER: Look

    £84.99

  • LOOK Axle Assembly KEO Blade Carbon Ti L/H

    MANUFACTURER: Look

    £84.99

  • LOOK Locking Nut for Keo Power Pedals Right (1 pc)

    MANUFACTURER: Look

    £6.99

  • LOOK Locking Nut for Keo Power Pedals Left (1 pc)

    MANUFACTURER: Look

    £6.99

  • LOOK Axle Cap & Bolt Kit for Keo Blade 2 Ti (inc. L/H & R/H)

    MANUFACTURER: Look

    £17.99

  • LOOK Axle Assembly Keo Blade 2 CroMo R/H (inc. Cap & Bolt)

    MANUFACTURER: Look

    £34.99

  • LOOK Axle Assembly Keo Blade 2 CroMo L/H (inc. Cap & Bolt)

    MANUFACTURER: Look

    £34.99

  • LOOK Axle Cap & Bolt Kit for Keo Blade 2 CroMo (inc. L/H & R/H)

    MANUFACTURER: Look

    £17.99

  • Replacement retention Blade for the Look KEO 2 Blade pedal. Carbon Blade does the work of the original traditional spring for cleat retention. Not suitable for other pedals.

    MANUFACTURER: Look

    £38.99

  • Replacement retention Blade for the Look KEO 2 Blade pedal. Carbon Blade does the work of the original traditional spring for cleat retention. Not suitable for other pedals.

    MANUFACTURER: Look

    £38.99

  • Replacement retention Blade for the Look KEO 2 Blade pedal. Carbon Blade does the work of the original traditional spring for cleat retention. Not suitable for other pedals.

    MANUFACTURER: Look

    £38.99

  • Replacement Keo 2 Max Blade tension springs for use with the Keo 2 Max Blade pedals. The Keo 2 Max Blade is a composite material and injected with glass fibres for smoother engaging for the Keo 2 Max.

    MANUFACTURER: Look

    £19.49

  • Replacement Keo 2 Max Blade tension springs for use with the Keo 2 Max Blade pedals. The Keo 2 Max Blade is a composite material and injected with glass fibres for smoother engaging for the Keo 2 Max.

    MANUFACTURER: Look

    £19.49

  • LOOK Magnets for KEO Fitting System (4 pcs)

    MANUFACTURER: Look

    £15.99

  • Look Adjustable Q-Factor Washer (fits KEO 2 Max/KEO Blade) From 53 to 55mm Q-Factor

    MANUFACTURER: Look

    £8.99

  • SHARING A COMMON AMBITION
    The EXAKT power meter is the result of a close collaboration between two leaders: LOOK and SRM.

    SRM developed in 1986 the first power meter, then Democratized this technology by equipping the greatest champions and cyclists in search of true training precision.

    LOOK invented in 1984 the first automatic pedal, revolutionizing the world of cycling. Continuing to evolve this technology in recent decades, LOOK pedals are a model of innovation and performance.

    Imagine a totally integrated power meter, extremely accurate, reliable and ultra-light!

    The EXAKT power meter changes the rules and redefines the limits to enter in a world of precision, control and constant progression.


    POWERFUL - LIGHT - RELIABLE
    The carbon pedal body ensures an incomparable lightness and stiffness. The contact surface is made with stainless steel material for optimum stability and power transfer.

    The spindle, result of the most advanced development, receives all electronic components. It is assembled with an oversized ball bearing and a needle bearing to ensure a better load distribution.


    CORRECT MEASUREMENT IN THE CORRECT POSITION
    The new EXAKT power meter uses the latest technical innovations we have developed.

    Built with SRM’s experienced handcrafted precision, the EXAKT power meter pedal measures and transmits accurate and consistent power data for the performance driven cyclist.

    Accurate, lighter, efficient: simply EXAKT.


    DESIGNED TO FACE THE ELEMENTS
    The pedal waterproofness has been the focus of attention thanks to the integration of new components - double seals system on the inside and end cap on the external - which guarantee the water tightness of the axle line.

    Answering IPX6 / IPX7 * standard, the EXAKT will allow you to face the worst weather conditions.

    *IPX6 Powerful water jets / 1 minute per square meter for at least 3 minutes Water volume : 100 litres per minute Pressure : 100 kPa at distance of 3 m. IPX7 Immersion, up to 1 m depth Test duration : 30 minutes.


    PROGRESS AND PASSION
    The greatest victories are the fruit of modest details, slight but steady progress.

    The EXAKT allows you to measure every detail of your performance, to improve your training habits to help you discover your limits and progress constantly.

    Equipped with dual Bluetooth L.E. and ANT + compatibility, the EXAKT gives you the choice to record, analyse and share your data.


    POWER
    Independent of environmental factors, measuring the power output allows to manage your training effectively, to define your training zone and to follow precisely the evolution of your performances.

    CADENCE
    It is the number of pedal strokes you make in one minute. In other words, your speed of execution. Combined with the force you apply on the pedals it gives the power output.

    TORQUE ANALYSIS
    Measuring left and right torque for each pedal stroke to know maximum and minimum values as well as pedal stroke smoothness.

    BALANCE
    The balance function available on the DUAL version give you separate power from right and left leg. This is a gain of precision on the analysis of your performance.


    100 HOURS OF AUTONOMY FOR AN EXTENDED EXPERIENCE
    Every detail has been thought and improved to ensure an even easier experience.

    Lithium ion batteries provide a 100h battery life *

    Charging your batteries has never been easier.

    It is not necessary to take off your pedals, a simple magnetic connector can recharge your two pedals simultaneously to ensure unlimited performance


    ANALYZE - COMPARE - SHARE
    Track your day-to-day activities, set your goals, and drive the evolution of your performance from the measured data.

    The SRM PC8 allows you to display values such as power, heart rate, speed, distance, location as well as training metrics such as Training Stress Score®, Normalized® power and Intensity Factor®.

    COLOUR: black
    MANUFACTURER: Look

    £1350.00

  • SHARING A COMMON AMBITION
    The EXAKT power meter is the result of a close collaboration between two leaders: LOOK and SRM.

    SRM developed in 1986 the first power meter, then Democratized this technology by equipping the greatest champions and cyclists in search of true training precision.

    LOOK invented in 1984 the first automatic pedal, revolutionizing the world of cycling. Continuing to evolve this technology in recent decades, LOOK pedals are a model of innovation and performance.

    Imagine a totally integrated power meter, extremely accurate, reliable and ultra-light!

    The EXAKT power meter changes the rules and redefines the limits to enter in a world of precision, control and constant progression.


    POWERFUL - LIGHT - RELIABLE
    The carbon pedal body ensures an incomparable lightness and stiffness. The contact surface is made with stainless steel material for optimum stability and power transfer.

    The spindle, result of the most advanced development, receives all electronic components. It is assembled with an oversized ball bearing and a needle bearing to ensure a better load distribution.


    CORRECT MEASUREMENT IN THE CORRECT POSITION
    The new EXAKT power meter uses the latest technical innovations we have developed.

    Built with SRM’s experienced handcrafted precision, the EXAKT power meter pedal measures and transmits accurate and consistent power data for the performance driven cyclist.

    Accurate, lighter, efficient: simply EXAKT.


    DESIGNED TO FACE THE ELEMENTS
    The pedal waterproofness has been the focus of attention thanks to the integration of new components - double seals system on the inside and end cap on the external - which guarantee the water tightness of the axle line.

    Answering IPX6 / IPX7 * standard, the EXAKT will allow you to face the worst weather conditions.

    *IPX6 Powerful water jets / 1 minute per square meter for at least 3 minutes Water volume : 100 litres per minute Pressure : 100 kPa at distance of 3 m. IPX7 Immersion, up to 1 m depth Test duration : 30 minutes.


    PROGRESS AND PASSION
    The greatest victories are the fruit of modest details, slight but steady progress.

    The EXAKT allows you to measure every detail of your performance, to improve your training habits to help you discover your limits and progress constantly.

    Equipped with dual Bluetooth L.E. and ANT + compatibility, the EXAKT gives you the choice to record, analyse and share your data.


    POWER
    Independent of environmental factors, measuring the power output allows to manage your training effectively, to define your training zone and to follow precisely the evolution of your performances.

    CADENCE
    It is the number of pedal strokes you make in one minute. In other words, your speed of execution. Combined with the force you apply on the pedals it gives the power output.


    100 HOURS OF AUTONOMY FOR AN EXTENDED EXPERIENCE
    Every detail has been thought and improved to ensure an even easier experience.

    Lithium ion batteries provide a 100h battery life *

    Charging your batteries has never been easier.

    It is not necessary to take off your pedals, a simple magnetic connector can recharge your two pedals simultaneously to ensure unlimited performance


    ANALYZE - COMPARE - SHARE
    Track your day-to-day activities, set your goals, and drive the evolution of your performance from the measured data.

    The SRM PC8 allows you to display values such as power, heart rate, speed, distance, location as well as training metrics such as Training Stress Score®, Normalized® power and Intensity Factor®.

    COLOUR: black
    MANUFACTURER: Look

    £760.00

  • FEEL THE NEW X-PERIENCE
    LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun.

    TECHNOLOGY
    THE BEST POWER TO WEIGHT RATIO

    All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial.

    LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product.

    Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh.

    The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market.

    LATERAL CONTACT SUPPORT

    Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.

    MECHANISM GEOMETRY

    The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.

    ADJUSTABLE TENSION

    An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level.

    FEATURES

    USE: XC Competition and Leisure
    TENSION: 6 to 14
    BODY: Aluminium
    SPINDLE: Chromoly +
    FLOAT: 6°
    PLATFORM MATERIAL: Chromoly
    PLATFORM AREA: 350 mm²
    PLATFORM WIDTH: 57 mm
    STACK HEIGHT + CLEATS: 16,8 mm (10,7 + 6,1 mm)
    WEIGHT PEDAL: 195 g
    WEIGHT PAIR + CLEATS: 494 g
    GUARANTY: 2 years

    COLOUR: grey
    MANUFACTURER: Look

    £40.00

  • FEEL THE NEW X-PERIENCE
    LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun.

    TECHNOLOGY
    THE BEST POWER TO WEIGHT RATIO

    All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial.

    LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product.

    Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh.

    The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market.

    LATERAL CONTACT SUPPORT

    Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.

    MECHANISM GEOMETRY

    The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.

    ADJUSTABLE TENSION

    An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level.

    FEATURES

    USE: XC Competition and Leisure
    TENSION: 6 to 14
    BODY: Aluminium
    SPINDLE: Chromoly +
    FLOAT: 6°
    PLATFORM MATERIAL: Chromoly
    PLATFORM AREA: 350 mm²
    PLATFORM WIDTH: 57 mm
    STACK HEIGHT + CLEATS: 16,8 mm (10,7 + 6,1 mm)
    WEIGHT PEDAL: 195 g
    WEIGHT PAIR + CLEATS: 494 g
    GUARANTY: 2 years

    COLOUR: red
    MANUFACTURER: Look

    £40.00

  • FEEL THE NEW X-PERIENCE

    LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun.

    TECHNOLOGY

    THE BEST POWER TO WEIGHT RATIO

    All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial.

    LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product.

    Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh.

    The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market.

    LATERAL CONTACT SUPPORT

    Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.

    MECHANISM GEOMETRY

    The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.

    ADJUSTABLE TENSION

    An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level.

    FEATURES
    USE: XC Competition and Leisure
    TENSION: 6 to 14
    BODY: Composite
    SPINDLE: Chromoly +
    FLOAT: 6°
    PLATFORM MATERIAL: Chromoly
    PLATFORM AREA: 515 mm²
    PLATFORM WIDTH: 60 mm
    STACK HEIGHT + CLEATS: 16,8 mm (10,7 + 6,1 mm)
    WEIGHT PEDAL: 180 g
    WEIGHT PAIR + CLEATS: 464 g
    GUARANTY: 2 years

     

    COLOUR: black
    MANUFACTURER: Look

    £65.00

  • FEEL THE NEW X-PERIENCE

    LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun.

    TECHNOLOGY

    THE BEST POWER TO WEIGHT RATIO

    All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial.

    LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product.

    Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh.

    The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market.

    LATERAL CONTACT SUPPORT

    Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.

    MECHANISM GEOMETRY

    The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.

    ADJUSTABLE TENSION

    An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level.

    FEATURES
    USE: XC Competition and Leisure
    TENSION: 6 to 14
    BODY: Carbon
    SPINDLE: Chromoly +
    FLOAT: 6°
    PLATFORM MATERIAL: Chromoly
    PLATFORM AREA: 515 mm²
    PLATFORM WIDTH: 60 mm
    STACK HEIGHT + CLEATS: 16,8 mm (10,7 + 6,1 mm)
    WEIGHT PEDAL: 170 g
    WEIGHT PAIR + CLEATS: 444 g
    GUARANTY: 2 years

    COLOUR: black
    MANUFACTURER: Look

    £99.00

  • FEEL THE NEW X-PERIENCE

    LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun.

    TECHNOLOGY

    THE BEST POWER TO WEIGHT RATIO

    All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial.

    LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product.

    Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh.

    The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market.

    LATERAL CONTACT SUPPORT

    Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.

    MECHANISM GEOMETRY

    The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.

    ADJUSTABLE TENSION

    An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level.

    FEATURES
    USE: XC Competition and Leisure
    TENSION: 6 to 14
    BODY: Carbon
    SPINDLE: Titanium
    FLOAT: 6°
    PLATFORM MATERIAL: Chromoly
    PLATFORM AREA: 515 mm²
    PLATFORM WIDTH: 60 mm
    STACK HEIGHT + CLEATS: 16,8 mm
    WEIGHT PEDAL: 150 gr
    WEIGHT PAIR + CLEATS: 404 gr
    GUARANTY: 2 years

    COLOUR: black
    MANUFACTURER: Look

    £180.00

  • The X-TRACK EN-RAGE PLUS pedal body is made of forged aluminium. It has a 67 mm wide platform for a 664 mm ² of contact surface. This provides improved stability and support, especially at high speed. The pins and ribbed pedal body ensure good grip in all circumstances, even when not clipped in. The X-TRACK EN-RAGE PLUS model is perfectly suited to the requirements of the ENDURO rider.

    • Expanding the X-TRACK range.
    • Designed to meet the specific requirements of TRAIL / ENDURO riders :
    • A pedal platform designed to be compatible with market leading shoes.
    • Pins that offer adjustable, maximum grip.
    • Clip-in and clip-out made easier thanks to a wide, easy to find platform.
    • Built to last, a purpose built robust pedal

    COLOUR: bronze
    MANUFACTURER: Look

    £95.00

  • The X-TRACK EN-RAGE PLUS pedal body is made of forged aluminium. It has a 67 mm wide platform for a 664 mm ² of contact surface. This provides improved stability and support, especially at high speed. The pins and ribbed pedal body ensure good grip in all circumstances, even when not clipped in. The X-TRACK EN-RAGE PLUS model is perfectly suited to the requirements of the ENDURO rider.

    • Expanding the X-TRACK range.
    • Designed to meet the specific requirements of TRAIL / ENDURO riders :
    • A pedal platform designed to be compatible with market leading shoes.
    • Pins that offer adjustable, maximum grip.
    • Clip-in and clip-out made easier thanks to a wide, easy to find platform.
    • Built to last, a purpose built robust pedal

    COLOUR: black/gold
    MANUFACTURER: Look

    £200.00

  • LEAVE THE ROADS BEHIND

    The X-Track pedal is the best gravel biking pedal out there. Based on the design of a standard SPD model, the X-track can be used with MTB shoes, allowing you to fully enjoy your surroundings when you put the bike down and pursue your wanderings on foot! Offering the best power-to-weight ratio in its class (wide pedal-to-shoe contact area and minimal weight), the pedal provides you with optimal grip and power transfer to go further, for longer. This limited edition is an invitation to explore; to take your bike off the beaten tracks, to leave the roads behind and discover freedom!

    Technology:X-TRACK
    Tention:X-TRACK
    Body:ALUMINIUM
    Spindle:CHROMOLY +
    Platform Material:ALUMINIUM
    Platform Area:350mm²
    Platform Width:57mm
    Stack Height + Cleats:16,8 mm (10,7+6,1mm)
    Weight Pedal:195g
    Weight Pair + Cleat:494g

    MANUFACTURER: Look

    £40.00

  • For use with original, pre-Keo pedals, the LOOK Delta shape cleat functions by a rotational movement that allows release by the interior or exterior of the foot. The two sided exit improves safety. There is nothing to interfere with inside pedal release.

    The fluoropolymer material eases entry and exit and diminishes considerably the possibility of cleat noise.

    MANUFACTURER: Look

    £14.49

  • COLOUR: black
    MANUFACTURER: Look

    £12.99

  • The standard Keo cleat has been developed with the goal of minimizing weight and to be a simplified cleat and pedal ensemble, while maintaining compatibility with all shoes on the market. The kinematics function is identical to the standard DELTA pedal. Cleat entry and release is secure and efficient.

    The new Keo GRIP is an anti-slip cleat. It is safer for walking and compatible with the complete Keo line. The TPU inserts help keep the cleat in position on the sole side of the cleat and eliminate slip especially with carbon soled shoes, while LOOKs Position Memory technology allows easy cleat replacement by retaining the position of the previous cleat.

    COLOUR: black
    MANUFACTURER: Look

    £16.99

  • The standard Keo cleat has been developed with the goal of minimizing weight and to be a simplified cleat and pedal ensemble, while maintaining compatibility with all shoes on the market. The kinematics function is identical to the standard DELTA pedal. Cleat entry and release is secure and efficient.

    The new Keo GRIP is an anti-slip cleat. It is safer for walking and compatible with the complete Keo line. The TPU inserts help keep the cleat in position on the sole side of the cleat and eliminate slip especially with carbon soled shoes, while LOOKs Position Memory technology allows easy cleat replacement by retaining the position of the previous cleat.

    COLOUR: grey
    MANUFACTURER: Look

    £16.99

  • The standard Keo cleat has been developed with the goal of minimizing weight and to be a simplified cleat and pedal ensemble, while maintaining compatibility with all shoes on the market. The kinematics function is identical to the standard DELTA pedal. Cleat entry and release is secure and efficient.

    The new Keo GRIP is an anti-slip cleat. It is safer for walking and compatible with the complete Keo line. The TPU inserts help keep the cleat in position on the sole side of the cleat and eliminate slip especially with carbon soled shoes, while LOOKs Position Memory technology allows easy cleat replacement by retaining the position of the previous cleat.

    COLOUR: red
    MANUFACTURER: Look

    £16.99

  • The Keo Covers protect your cleats and improve walking in cleated shoes, while being compatible with all Keo cleats.

    MANUFACTURER: Look

    £9.99

  • For use with original, pre-Keo pedals, the LOOK Delta shape cleat functions by a rotational movement that allows release by the interior or exterior of the foot. The two sided exit improves safety. There is nothing to interfere with inside pedal release.

    The fluoropolymer material eases entry and exit and diminishes considerably the possibility of cleat noise.

    MANUFACTURER: Look

    £14.49

  • LOOK KEO Cleat Screws & Washers Extra Long 20mm (6 pcs of each)

    MANUFACTURER: Look

    £5.99

  • Spare cleats for LOOKs S-Track mountain bike pedal system.

    LOOKs DCS cleats have been optimally designed for excellent mud dispersal and gives a large contact surface between cleat and pedals. Supplied with wedges to increase or decrease shoe sole/pedal contact, these cleats are compatible with all types of mountain bike soles.

    MANUFACTURER: Look

    £15.99

  • LOOK Keo Blade Replacement Tool

    MANUFACTURER: Look

    £112.99



eXTReMe Tracker